Page 32 - APRO_2019_Catalog

A19010 PHANES-K Series Industrial SLC SATA III CFast™ Card (CFA)

 Features
 SLC-NAND flash technology
 Optional rugged metal frame
 Support Trim command set
 Support Native Command Queuing (NCQ)
 Support LDPC (Low Density Parity Check) ECC algorithm
 Support S.M.A.R.T. command set and utility
 Support Power Loss Protection
 Capacities from 8GB up to 32GB
 Specification
 Compatibility SATA Revision 3.2  Power consumption
SLC CFast™ Specification v2.0  Power requirement +3.3V ± 5%

ATA-8 ACS4 command set
1,650 mW (Max.)
Reading mode
 Declarations RoHS & REACH compliant  Writing mode 1,700 mW(Max.)
 Flash technology SLC-NAND flash technology  Idle mode 325 mW (Max.)
 Form-factor CFast™ Type I  Reliability
 Host Interface 7 pins (data) + 17 pins (power)  Wear-leveling Static and Dynamic wear-leveling algorithms
CFast™ connector  TBW Up to 325 TBW at 32GB Capacity
 Performance (Client workload by JESD-219A)
aSLC  Data transfer rate SATA 1.5Gb/s, 3.0Gb/s, 6.0Gb/s  MTBF > 3,000,000 hours
510 MB/sec (Max.)
Up to 60,000 times
Sequential read

Erase counts

LDPC (Low Density Parity Check)
305 MB/sec (Max.)


ECC
Sequential write
 Environmental  Physical specification
 Operating temp. STD. 0˚C~+70˚C/IND. -40˚C~+85˚C  Weight (Max.) Plastic frame : 10g
 Non-operating temp. STD. -20˚C~+80˚C/IND. -50˚C~+95˚C Rugged metal frame : 13g
 Humidity 10% ~ 95% non-condensing  Dimension (WxLxH) 42.8 x 36.4 x 3.5 (mm)
 Vibration 80 Hz to 2K Hz, 20G, 3axes  Conformal coating Optional

Warranty
0.5ms, 1500 G, 3 axes
Shock

MLC  Altitude 70,000 feet  SLC STD. grade 3 years or within 60,000 erasing counts
SLC IND. grade
5 years or within 60,000 erasing counts

 Part Number List
Standard plastic frame CFA -40ºC~+85ºC Capacity Optional rugged metal CFA -40ºC~+85ºC
0ºC~+70ºC
0ºC~+70ºC
Capacity
3D-NAND 16GB SPCFA008G-PKCTC-(T) WPCFA008G-PKITI-(T) 16GB SRCFA008G-PKCTC-(T) WRCFA008G-PKITI-(T)
8GB
8GB
SRCFA016G-PKCTC-(T)
WPCFA016G-PKITI-(T)
SPCFA016G-PKCTC-(T)
WRCFA016G-PKITI-(T)
SPCFA032G-PKCTC-(T)
WRCFA032G-PKITI-(T)
32GB
WPCFA032G-PKITI-(T)
SRCFA032G-PKCTC-(T)
32GB

X1 Part Number Decoder X5 X6 X7 X8 X9 X10 X11 X12 X13 X14 X15 X16 X17 X18 X19 X20
X2
X3
X4
Example
DRAM Module W Grade C F A 0 3 2 G P Controller version T I T C
K
I
R
X12
X1
S : Standard grade operating temp. 0ºC~+70ºC A, B, C, D…..K
W: Industrial grade operating temp. -40ºC~+85ºC
X13 Controller grade
X2 The material of casing C : Commercial grade
Adapter P : Plastic frame X5 Product category I : Industrial grade
R : Rugged metal frame
X14
Flash IC brand
X3
X4
CFA : CFast™ card T : Toshiba SLC-NAND flash IC
X15 Flash IC grade
X6 X7 X8 X9 Capacity C : Commercial grade
Card-drive 016G : 16GB Blank : Standard product w/o thermal sensor and conformal-coating
008G : 8GB
I : Industrial grade
Reserved for specific requirements
X20
X19
X18
X17
032G : 32GB
Controller
X11
T : Thermal Sensor (optional)
C : Conformal coating (optional)
P : PHANES Series
25
Product specifications are subject to change without prior notice.