|
 |
| |
| |
|
IDE - Dual CFs Adapter |
|
|
IDE - Dual CFs Adapter
APRO's IDE to dual CF cards adapter comes with 4 models. One is equipped with a 40-pin male IDE connector and the others are with 40-pin or 44-pin or 40/44-pin IDE connectors. The CF socket is on each side of PCB. Both CF sockets supports type I and type II CompactFlash Cards. Master/Slave is setup by Jumper. One CF is master and the other CF is slave. |
|
|
Vertical type 40-pin male IDE to dual CF cards adapter. |
|
40-pin male IDE to dual CF cards adapter. |
|
44-pin male IDE to dual CF cards adapter. |
|
40/44-pin male IDE to CF cards adapter. |
|
|
|
 |
 |
| BON Series Industrial 2.5" Dual Controlled SATA II SSD |
|
* SLC - NAND type flash technology
* Support Fast Erase by Hardware and Software definition
* Support Secure Erase by Software ATA command vendor code
* High performance by disk RAID-0 setting with dual controlled
* Dual controlled capacity from 32GB up to 128GB in 9.5mm casing
* Dual controlled highest capacity from 256GB in 15.3mm casing |
|
|
| HERMES Series Industrial CFast Card |
|
* RoHS compliant
* SLC-NAND flash technology
* Compliant CFast?Specification V1.0
* CFast Type I form-factor
* 7-pin (data) + 17-pin (power) CFast interface
* Support SATA I/II (1.5/3.0Gbps) interface
* Fixed disk type
* Data transfer support UDMA-5 and backward compatible
* Support BCH ECC 8 bits or 15 bits in 512 bytes
* Power supply support +3.3V ?5%
* Capacity supports 2GB, 4GB, 8GB and 16GB |
|
|
|
|
|
 |
|
Copyright
© 2004 ~ 2009 APRO Co., Ltd. - All rights reserved |
|
|
|
 |
|
