Operating temperature supports
Standard grade 0 degree ~ +70 degree
Features
● SLC - NAND type flash technology
● Support Fast Erase by Hardware and Software definition
● Support Secure Erase by Software ATA command vendor code
● Extremely rugged metal casing to endure harsh environments
● Performance up to 178.3MB/sec (1200X)
● Capacity from 8GB up to 128GB
Specifications
◆ Compatibility：SATA 1.0a and SATA 2.6 specification compliance
◆ Flash technology：SLC-NAND type flash based
◆ Form-factor：Rugged Metal 2.5” SATA SSD
◆ Host Interface：SATA 7-pin (data) + 15-pin (power)
◆ Performance
● Data transfer mode：Serial ATA Gen-I and Gen-II (1.5Gb/s and 3.0Gb/s)
● Sequential read：178.3 MB/sec (Max.)
● Sequential write：154.3 MB/sec (Max.)
● Average access time：0.1ms (estimated)
◆ Environmental specification
● Operating temperature：Standard grade 0 degree ~ +70 degree
● Non-operating temperature：Standard grade -20 degree ~ +80 degree
● Humidity：10% ~ 95% non-condensing
● Vibration：15G compliance to MIL-STD-810F
● Shock：1,500G compliance to MIL-STD-810F
● Altitude：70,000 feet
◆ Functionality
● Hardware：Fast Erase the media data by hardware trigger
● Software：
- Fast Erase the media data by ATA command vender code
- Secure Erase the media data by ATA command vender code
● Sanitization Procedure：
- Default sanitizing by erase block data to 0xFF on file table for Fast Erase
- Sanitizing Based on NSA Manual 130-2 for Secure Erase
- Sanitizing Based on USA Air Force AFSSI 5020 for Secure Erase
◆ Power consumption
● Power requirement：+5V + 10%
● Reading mode：450mA (Max.)
● Writing mode：500mA (Max.)
● Sleeping mode：320mA (Max.)
◆ Reliability
● Wear-leveling：Static wear-leveling algorithms
● MTBF：> 3,000,000 hours
● ECC：8 bits or 15 bits per 512bytes block
● Endurance：> 2,000,000 cycle
● Data retention：10 years
◆ Physical specification
● Weight (max.) ：115g + 5g /4.06oz
● Dimension(W x L x H) ：69.90 x 99.70 x 9.50 (mm)
◆ Conformal coating：Option for special request
◆ Warranty
● Standard grade：3 years |
