Industrial CompactFlash Card
Industrial CFast Card
Industrial PCMCIA ATA Card
Industrial micro IDE Module
Industrial micro SATA Module
Industrial micro USB Module
Industrial SSD_2.5 inch PATA (IDE) SSD
Industrial SSD_2.5 inch SATA SSD
Industrial SSD_1.8 inch PATA (IDE) SSD
Industrial SSD_1.8 inch SATA SSD
Industrial Rugged USB Flash Disk
Industrial Secure Digital (SD) Memory Card
Industrial Secure Digital High Capacity (SDHC) Memory Card
Industrial CF Card Adapter
Industrial PCMCIA/CF Card Drive
MLC SSD_2.5 inch PATA (IDE) SSD
MLC SSD_2.5 inch SATA SSD
MLC SSD_1.8 inch PATA (IDE) SSD
MLC SSD_1.8 inch SATA SSD
MLC CFast Card
MLC micro USB Module
MLC USB Flash Disk
        Spec-Sheet
      DataSheet
      Question to APRO engineer
      Inquiry
      How to buy
 

Operating temperature supports optionally
Industrial grade -40 degree ~ 85 degree

Features:
  SLC-NAND type flash technology
  2.5 inch IDE drive form-factor
  Extremely rugged metal casing to endure harsh environments
  Capacity from 32MB up to 8GB
  Compatible with ATA/ATAPI-5 standard
  Data transfer support PIO 0~4 and UDMA 0~4
  Master / Slave selectable
  Performance up to 25.9MB/sec

Specifications:
CompatibilityATAPI-5 and True IDE mode
Flash technologyNAND type SLC flash based
Form-factorRugged Metal 2.5 inch IDE hard disk drive form-factor
Master / slave settingBy jumper
Host interfaceStandard 44-pin IDE male connector
Performance
  ● Data transfer modePIO-4 mode or UDMA-4 mode (Default setting)
  ● Data transfer rate66.6MB/sec under UDMA-4 mode
  ● Sequential read25.9 MB/sec (Max. /with dual flash / 100MB file test)
  ● Sequential write11.9 MB/sec (Max. /with dual flash / 100MB file test)
  ● Average access time0.7ms (estimated)
Environmental specification
  ● Operating temperatureIndustrial grade -40 degree ~ 85 degree
  ● Non-operating temperatureIndustrial grade -50 degree ~ 95 degree
  ● Humidity10% ~ 95% non-condensing
  ● Acoustic noise0dB
  ● Vibration15G compliance to MIL-STD-810F
  ● Shock1,500G compliance to MIL-STD-810F
  ● Altitude70,000 feet
Power consumption
  ● Power requirement+5V + 10%
  ● Reading mode190.0mA(Max.)
  ● Writing mode200.0mA(Max.)
  ● Sleeping mode117.5mA(Max.)
Reliability
  ● Wear-levelingDynamic wear-leveling algorithms
  ● MTBF> 1,000,000 hours
  ● ECCEnhanced management 4-bits per 512bytes block
  ● Endurance> 2,000,000 cycles logically contributed by dynamic wear-leveling and advanced bad   sector management algorithms
  ● Data reliability< 1 non-recoverable error in 1014 bits read
  ● Data retention10 years
Physical specification
  ● Weight (max.)
    - 2.5 inch =110g / 3.88 oz
  ● Dimension(W x L x H)
    - 2.5 inch = 69.85 x 100.20 x 9.50 (mm)
Conformal coatingOption for special request
Warranty
  ● Industrial grade5 years

 
  Send an inquiry
PART NUMBER DESCRIPTION
Hermit Series Flash Card
* Industrial CF card
* Industrial ATA Card
* Rugged metal frame kit
* 266X up to 45MB/s.
* CF standard 4.1
* ATAPI-6 compliance
* PIO- or UDMA-4 mode
* Removable or fixed disk
* 32MB up to 16GB
* RoHS compliance
* Availability: Now
BON Series Industrial 2.5" Dual Controlled SATA II SSD
* SLC - NAND type flash technology
* Support Fast Erase by Hardware and Software definition
* Support Secure Erase by Software ATA command vendor code
* High performance by disk RAID-0 setting with dual controlled
* Dual controlled capacity from 32GB up to 128GB in 9.5mm casing
* Dual controlled highest capacity from 256GB in 15.3mm casing
 
  Copyright © 2004 ~ 2009 APRO Co., Ltd. - All rights reserved