Industrial CompactFlash Card
Industrial CFast Card
Industrial PCMCIA ATA Card
Industrial micro IDE Module
Industrial micro SATA Module
Industrial micro USB Module
Industrial SSD_2.5 inch PATA (IDE) SSD
Industrial SSD_2.5 inch SATA SSD
Industrial SSD_1.8 inch PATA (IDE) SSD
Industrial SSD_1.8 inch SATA SSD
Industrial Rugged USB Flash Disk
Industrial Secure Digital (SD) Memory Card
Industrial Secure Digital High Capacity (SDHC) Memory Card
Industrial CF Card Adapter
Industrial PCMCIA/CF Card Drive
MLC SSD_2.5 inch PATA (IDE) SSD
MLC SSD_2.5 inch SATA SSD
MLC SSD_1.8 inch PATA (IDE) SSD
MLC SSD_1.8 inch SATA SSD
MLC CFast Card
MLC micro USB Module
MLC USB Flash Disk
        Spec-Sheet
      DataSheet
      Question to APRO engineer
      Inquiry
      How to buy
 

Operating temperature supports optionally
Standard grade 0 degree ~ 70 degree

Features:
  SLC-NAND type flash technology
  2.5 inch IDE drive form-factor
  Extremely rugged metal casing to endure harsh environments
  Capacity from 32MB up to 8GB
  Compatible with ATA/ATAPI-5 standard
  Data transfer support PIO 0~4 and UDMA 0~4
  Master / Slave selectable
  Performance up to 25.9MB/sec

Specifications:
CompatibilityATAPI-5 and True IDE mode
Flash technologyNAND type SLC flash based
Form-factorRugged Metal 2.5 inch IDE hard disk drive form-factor
Master / slave settingBy jumper
Host interfaceStandard 44-pin IDE male connector
Performance
  ● Data transfer mode
PIO-4 mode or UDMA-4 mode (Default setting)
  ● Data transfer rate
66.6MB/sec under UDMA-4 mode
  ● Sequential read
25.9 MB/sec (Max. /with dual flash / 100MB file test)
  ● Sequential write
11.9 MB/sec (Max. /with dual flash / 100MB file test)
  ● Average access time
0.7ms (estimated)
Environmental specification
  ● Operating temperature
Standard grade 0 degree ~ 70 degree
  ● Non-operating temperatureStandard grade -20 degree ~ 80 degree
  ● Humidity
10% ~ 95% non-condensing
  ● Acoustic noise
0dB
  ● Vibration
15G compliance to MIL-STD-810F
  ● Shock
1,500G compliance to MIL-STD-810F
  ● Altitude
70,000 feet
Power consumption
  ● Power requirement
+5V + 10%
  ● Reading mode
190.0mA(Max.)
  ● Writing mode
200.0mA(Max.)
  ● Sleeping mode
117.5mA(Max.)
Reliability
  ● Wear-leveling
Dynamic wear-leveling algorithms
  ● MTBF
> 1,000,000 hours
  ● ECC
Enhanced management 4-bits per 512bytes block
  ● Endurance
> 2,000,000 cycles logically contributed by dynamic wear-leveling and advanced bad   sector management algorithms
  ● Data reliability
< 1 non-recoverable error in 1014 bits read
  ● Data retention
10 years
Physical specification
  ● Weight (max.)

   
- 2.5 inch =110g / 3.88 oz
  ● Dimension(W x L x H)

    -
2.5 inch = 69.85 x 100.20 x 9.50 (mm)
Conformal coatingOption for special request
Warranty
  ● Standard grade
3 years

 
  Send an inquiry
PART NUMBER DESCRIPTION
Hermit Series Flash Card
* Industrial CF card
* Industrial ATA Card
* Rugged metal frame kit
* 266X up to 45MB/s.
* CF standard 4.1
* ATAPI-6 compliance
* PIO- or UDMA-4 mode
* Removable or fixed disk
* 32MB up to 16GB
* RoHS compliance
* Availability: Now
HERMES Series Industrial CFast Card
* RoHS compliant
* SLC-NAND flash technology
* Compliant CFast?Specification V1.0
* CFast Type I form-factor
* 7-pin (data) + 17-pin (power) CFast interface
* Support SATA I/II (1.5/3.0Gbps) interface
* Fixed disk type
* Data transfer support UDMA-5 and backward compatible
* Support BCH ECC 8 bits or 15 bits in 512 bytes
* Power supply support +3.3V ?5%
* Capacity supports 2GB, 4GB, 8GB and 16GB
 
  Copyright © 2004 ~ 2009 APRO Co., Ltd. - All rights reserved