Operating temperature supports optionally
Standard grade 0 degree ~ +70 degree and Industrial grade -40 degree ~ +85 degree

Features
●  Standard 40-pin female IDE connector
●  Compact form-factor in horizontal type
●  Comply with ATA/ATAPI-5 specification
●  Data transfer mode supports PIO 0~4 and UDMA 0~4
●  Options for standard grade and industrial grade
●  Master / Slave selectable
●  Write protection device by switch
●  LED Indicators
●  Performance up to 25.9 MB/sec
●  Disk capacity from 32MB to 4GB

Specifications
◆ Compatibility：ATA/ATAPI-5 and True IDE mode
◆ Flash technology：SLC-NAND type flash based
◆ Form-factor：Compact-design in horizontal leftward
◆ Host Interface：40-pins female IDE interface
◆ Master / Slave setting：By switch
◆ Write Protection Device：By switch
◆ LED indicators
   ● Blue: Power on
   ● Red: Operating
◆ Performance
   ● Data transfer mode：PIO-4 mode or UDMA-4 mode (Default setting)
   ● Data transfer rate：16.6MB/sec under PIO-4 mode
   ● Sequential read：25.9 MB/sec (Max. /with dual flash / 100MB file test)
   ● Sequential write：11.9 MB/sec (Max. /with dual flash / 100MB file test)
   ● Average access time：0.7ms (estimated)
◆ Environmental specification
   ● Operating temperature：Standard grade 0 degree ~ +70 degree / Industrial Grade -40 degree ~ +85 degree
   ● Non-operating temperature：Standard grade -20 degree ~ 80 degree / Industrial Grade -50 degree ~ +95 degree
   ● Humidity：10% ~ 95% non-condensing
   ● Vibration：20G compliance to MIL-STD-810F
   ● Shock：1,500G compliance to MIL-STD-810F
◆ Power consumption
   ● Power requirement：+5V + 10%
   ● Reading mode：73.2mA(Max.)
   ● Writing mode：76.2mA(Max.)
   ● Sleeping mode：63.4mA(Max.)
◆ Reliability
   ● Wear-leveling：Dynamic wear-leveling algorithms
   ● MTBF：> 1,000,000 hours
   ● ECC：Enhanced management 4-bits per 512bytes block
   ● Endurance：> 2,000,000 cycles logically contributed by dynamic wear-leveling and advanced bad   sector management algorithms
   ● Data reliability：< 1 non-recoverable error in 10¹⁴ bits read
   ● Data retention：10 years
◆ Physical specification
   ● Weight (max.)/g (oz) ：15g(0.53oz) / 10g(0.35oz)
   ● Dimension(W x L x H)/mm：51.85 x 26.50 x 8.70
◆ Warranty
   ● Standard grade：3 years
   ● Industrial grade：5 years