Language : English Chinese_Big5

DEMETER SERIES INDUSTRIAL MICRO USB FLASH MODULE_SLC Flash
Vertical Type Standard Form-Factor Standard 10 pins 2.54mm pin pitch Dimension(W x L x H) 34.20 x 15.40 x 6.30 (mm) Weight (max.) 15 g ± 1 g / 0.53 oz. Horizontal Type Bare Standard Form-Factor W/Mounting Hole Standard 10 pins 2.54mm pin pitch Dimension(W x L x H) 37.85 x 26.75 x 9.00 (mm) Weight (max.) 10 g ± 1 g / 0.35 oz. Horizontal Type Bare Low Profile Form-Factor W/Mounting Hole Low-profile 10 pins 2.00mm pin pitch Dimension(W x L x H) 37.85 x 26.75 x 5.90 (mm) Weight (max.) 10 g ± 1 g / 0.35 oz.
FEATURES
> SLC-NAND type flash technology > 2x5 header, x86 internal USB standard > Vertical : 2x5 2.54mm pitch pin connector > Horizontal : 2 solutions of 2x5 2.54mm & 2.00mm pitch pin connector > Complies with Microsoft Vista Ready-Boost® requirements > Fixed disk mode configuration (not a removable disk)	> Advanced error detection and error correction algorithms > High-speed USB 2.0 interface; backward compatible with USB 1.1 > Vertical : Capacities from 128MB up to 4GB > Horizontal : Capacities from 128MB up to 8GB > Performance up to 32.0 MB/sec
SPECIFICATIONS
> Compliant with USB 2.0 and USB 1.1 backwards compatible > Flash Technology :NAND type SLC flash based > Form-factor : - Vertical type : Standard - Horizontal type : Standard / Low profile / Lowprofile with mounting hole > Perfromance : - Data Transfer Rate : USB 2.0 ( 480Mbits / sec ) - Sequential read : 32.0 MB/sec (Dual Channel) - Sequential write : 16.9 MB/sec (Dual Channel) - Average access time : 0.6ms (estimated) > Environmental specification : - Humidity : 10% ~ 95% non-condensing - Acoustic noise : 0dB - Vibration : 15G - Shock : 1500G > Reliability : - Wear-leveling : Dynamic wear-leveling algorithms - MTBF : > 3,000,000 hours - Endurance : > 2,000,000 cycles logically contributed by static wear-leveling and advanced bad   sector management algorithms	- ECC : Enhanced management 8-bits per 512bytes block - Data Data retention : 10 Years > Power consumption : - 5V±10% via on board USB port - Reading mode : 110.0 mA (Max.) - Writing mode : 92.0 mA (Max.) - Sleeping mode : 43.0 mA (Max.) > Warranty : - 3 years warranty for SLC standard grade - 5 years warranty for SLC industrial grade > Conformal coating : Option for special request
ORDER INFORMATION
Capacity Vertical Type Standard Grade Vertical Type Industrial Grade 128MB SPMUM128M-UBCSC-VS WPMUM128M-UBISI-VS 256MB SPMUM256M-UBCSC-VS WPMUM256M-UBISI-VS 512MB SPMUM512M-UBCSC-VS WPMUM512M-UBISI-VS 001GB SPMUM001G-UBCSC-VS WPMUM001G-UBISI-VS 002GB SPMUM002G-UBCSC-VS WPMUM002G-UBISI-VS 004GB SPMUM004G-UBCSC-VS WPMUM004G-UBISI-VS	Capacity Horizontal Type Standard Grade Horizontal Type Industrial Grade 128MB SBMIF128M-UBCSC-HS (HL) WBMIF128M-UBISI-HS (HL) 256MB SBMIF256M-UBCSC-HS (HL) WBMIF256M-UBISI-HS (HL) 512MB SBMIF512M-UBCSC-HS (HL) WBMIF512M-UBISI-HS (HL) 001GB SBMIF001G-UBCSC-HS (HL) WBMIF001G-UBISI-HS (HL) 002GB SBMIF002G-UBCSC-HS (HL) WBMIF002G-UBISI-HS (HL) 004GB SBMIF004G-UBCSC-HS (HL) WBMIF004G-UBISI-HS (HL)
REMARKS
> VS : Vertical type standard form factor > HS : Horizontal type standard form factor > HL : Horizontal type low profile form factor

Industrial PCMCIA ATA Card - HERMIT Series Industrial CFast Card   - Standard grade operating temperature 0 degree ~ +70 degree   - Industrial grade operating temperature -40 degree ~ +85 degree   - Standard plastic / Rugged Metal frame kit optional.   - 266X HERMIT Series Performance up to 40MB/s.   - Compatible with PC card standard and PCMCIA V.2.1   - Compatible with ATA/ATAPI-6 standard.   - Optional PIO-0~4 / UDM -0~4 or Removable / Fixed Disk.   - Capacity from 128MB up to 16GB.   - Standard grade operating temperature 0 degree ~ +70 degree   - Industrial grade operating temperature -40 degree ~ +85 degree   - CFast Type I form-factor.   - Fixed disk type.   - Compliant CFast™ Specification V1.0   - 7-pin (data) + 17-pin (power) CFast interface.   - Support SATA I/II (1.5/3.0Gbps) interface.   - Capacity from 2GB up to 32GB.