APRO 2011 Website  
Language :
PRODUCTS SUPPORT ABOUT APRO
    BON SERIES INDUSTRIAL RUGGED METAL 2.5" PATA SOLID STATE DISK
2.5" PATA SSD - SLC Flash
2.5" Rugged Metal SATA II SSD - SLC Flash
Power Consumption +5 V ± 10%
Reading / Writing / Idel <mA / Max.>
360 mA / 400 mA / 240 mA
Capacity
8GB / 16GB / 32GB / 64GB / 128GB
Performance
Sequential read : 114.2 MB/sec (Max.)
Sequential write : 97.4 MB/sec (Max.)
Average access time : 0.2ms (estimated)
2.5" PATA SSD - MLC Flash
2.5" Rugged Metal SATA II SSD -MLC Flash
Power Consumption +5 V ± 10%
Reading / Writing / Idel <mA / Max.>
360 mA / 390 mA / 240 mA
Capacity
8GB / 16GB / 32GB / 64GB / 128GB / 256GB
Performance
Sequential read : 107.8 MB/sec (Max.)
Sequential write : 82.4 MB/sec (Max.)
Average access time : 0.2ms (estimated)
-
 
Power Consumption +5 V ± 10%
Reading / Writing / Idel <mA / Max.>
-
Capacity
-
Performance
-
-
 
Power Consumption +5 V ± 10%
Reading / Writing / Idel <mA / Max.>
-
Capacity
-
Performance
-
    FEATURES
> Standard 2.5” PATA (IDE) SSD form-factor
> Standard 44 pins PATA (IDE) male connector
> Data transfer mode support PIO 0~4 and UDMA 0~6
> Extremely rugged metal casing to endure harsh Environments
> Automatic 8 bits ECC and retry capabilities
> Supports static wear-leveling algorithms
> Supports Fast Erase by Hardware and Software definition
> Supports Secure Erase by Software ATA command vendor code
    SPECIFICATIONS
> Compatibility : ATA/ATAPI-7 and True IDE mode
> Form-factor : Standard Rugged Metal 2.5” PATA (IDE) SSD
> Host Interface : Standard 44 pins PATA (IDE) male connector
> Data transfer rate : Data transfer mode support PIO 0~4 and UDMA 0~6
> Environmental specification :
- Humidity : 10% ~ 95% non-condensing
- Acoustic noise : 0dB
- Vibration : 15G
- Shock : 1500G
> Reliability :
- Wear-leveling : Static wear-leveling algorithms
- MTBF : > 3,000,000 hours
- Endurance : > 2,000,000 cycles logically contributed by static wear-leveling and advanced bad
  sector management algorithms
- ECC : Enhanced management 8-bits per 512bytes block
- Data Data retention : 10 Years
> Physical specification :
- Weight (max.) : 115 g ± 5 g / 4.06 oz.
- Dimension(W x L x H) : 69.90 x 99.70 x 9.50 (mm)
> Warranty :
- 3 years warranty for SLC standard grade
- 5 years warranty for SLC industrial grade
- 1 years warranty for MLC product
> Conformal coating : Option for special request
> Functionality :
- Hardware : Fast Erase or Secure Erase the media data by hardware trigger
- Software : Fast Erase or Secure Erase the media data by ATA command vender code
> Sanitization Procedure :
- Default sanitizing by erase block data to 0xFF on file table for Fast Erase
- Sanitizing Based on NSA Manual 130-2 for Secure Erase
- Sanitizing Based on USA Air Force AFSSI 5020 for Secure Erase
- Sanitizing Based on DoD 5220.22-M for Secure Erase
- Sanitizing Based on IREC(IRIG)106 for Secure Erase
> Hardware Jumper Setting for Secure Erase & Fast Erase :
Hardware Jumper Setting for Secure Erase & Fast Erase
Dimension Spec-Sheet Datasheet Inquiry Technical Support How to buy
    ORDER INFORMATION
Capacity 2.5" PATA SSD - SLC
Standard Grade		 2.5" PATA SSD - SLC
Industrial Grade
008GB SR2IF008G-JACSC-UFE(USE) WR2IFD008G-JAISI-UFE(USE)
016GB SR2IF016G-JACSC-UFE(USE) WR2IFD016G-JAISI-UFE(USE)
032GB SR2IF032G-JACSC-UFE(USE) WR2IFD032G-JAISI-UFE(USE)
064GB SR2IF064G-JACSC-UFE(USE) WR2IFD064G-JAISI-UFE(USE)
128GB SR2IF128G-JACSC-UFE(USE) WR2IFD128G-JAISI-UFE(USE)
- - -
Capacity 2.5" PATA SSD - MLC
Standard Grade		 2.5" PATA SSD - MLC
Industrial Grade
008GB SR2IF008G-JACMC-UFE(USE) WR2IF008G-JACMC-UFE(USE)/C
016GB SR2IF016G-JACMC-UFE(USE) WR2IF016G-JACMC-UFE(USE)/C
032GB SR2IF032G-JACMC-UFE(USE) WR2IF032G-JACMC-UFE(USE)/C
064GB SR2IF064G-JACMC-UFE(USE) WR2IF064G-JACMC-UFE(USE)/C
128GB SR2IF128G-JACMC-UFE(USE) WR2IF128G-JACMC-UFE(USE)/C
256GB SR2IF256G-JACMC-UFE(USE) WR2IF256G-JACMC-UFE(USE)/C
    REMARKS
> /C: Industrial grade operating temp. -40º C ~ +85 º C with special conformal coating treatment on PCBA
> U: defaulted as UDMA mode / Fixed disk type
Industrial PCMCIA ATA Card - HERMIT Series Industrial CFast Card
Industrial PCMCIA ATA Card-Plastic Fram Kit   - Standard grade operating temperature 0 degree ~ +70 degree
  - Industrial grade operating temperature -40 degree ~ +85 degree
  - Standard plastic / Rugged Metal frame kit optional.
  - 266X HERMIT Series Performance up to 40MB/s.
  - Compatible with PC card standard and PCMCIA V.2.1
  - Compatible with ATA/ATAPI-6 standard.
  - Optional PIO-0~4 / UDM -0~4 or Removable / Fixed Disk.
  - Capacity from 128MB up to 16GB.
Industrial CFast Card   - Standard grade operating temperature 0 degree ~ +70 degree
  - Industrial grade operating temperature -40 degree ~ +85 degree
  - CFast Type I form-factor.
  - Fixed disk type.
  - Compliant CFast™ Specification V1.0
  - 7-pin (data) + 17-pin (power) CFast interface.
  - Support SATA I/II (1.5/3.0Gbps) interface.
  - Capacity from 2GB up to 32GB.