| |
BON SERIES INDUSTRIAL RUGGED METAL 1.8" SATA II SOLID STATE DISK SUPPORT SECURE ERASE & FAST ERASE |
|
| 1.8" SATA II SSD - SLC Flash |
 |
Power Consumption +5 V ± 10%
Reading / Writing / Idel <mA / Max.> |
| 280 mA / 340 mA / 150 mA |
| Capacity |
| 8GB / 16GB / 32GB / 64GB |
| Performance |
Sequential read : 176.8 MB/sec (Max.)
Sequential write : 139.3 MB/sec (Max.)
Average access time : 0.2ms (estimated) |
|
| 1.8" SATA II SSD - MLC Flash |
|
Power Consumption +5 V ± 10%
Reading / Writing / Idel <mA / Max.> |
| 290 mA / 420 mA / 160 mA |
| Capacity |
| 8GB / 16GB / 32GB / 64GB / 128GB |
| Performance |
Sequential read : 172.0 MB/sec (Max.)
Sequential write : 98.5 MB/sec (Max.)
Average access time : 0.2ms (estimated) |
|
| - |
| |
Power Consumption +5 V ± 10%
Reading / Writing / Idel <mA / Max.> |
| - |
| Capacity |
| - |
| Performance |
| - |
|
| - |
| |
Power Consumption +5 V ± 10%
Reading / Writing / Idel <mA / Max.> |
| - |
| Capacity |
| - |
| Performance |
| - |
|
|
|
|
| > |
1.8” SATA SSD form-factor |
| > |
Standard SATA 7 pins (data) + 15 pins (power) |
| > |
Automatic 8 bits ECC and retry capabilities |
|
| > |
Supports static wear-leveling algorithms |
| > |
Supports Fast Erase by Hardware and Software definition |
| > |
Supports Secure Erase by Software ATA command vendor code |
|
|
|
| > |
Compatibility : Compliant with SATA 1.0a and SATA 2.6 specification |
| > |
Form-factor : Standard 1.8” SATA II SSD form-factor |
| > |
Host Interface : Standard SATA 7 pins (data) + 15 pins (power) |
| > |
Data transfer rate : Serial ATA Gen-I and II (1.5Gb/s and 3.0Gb/s) |
| > |
Environmental specification : |
| - |
Humidity : 10% ~ 95% non-condensing |
| - |
Acoustic noise : 0dB |
| - |
Vibration : 15G |
| - |
Shock : 1500G |
| > |
Reliability : |
| - |
Wear-leveling : Static wear-leveling algorithms |
| - |
MTBF : > 3,000,000 hours |
| - |
Endurance : > 2,000,000 cycles logically contributed by static wear-leveling and advanced
bad |
| |
sector management algorithms |
| - |
ECC : Enhanced management 8-bits per 512bytes block |
| - |
Data Data retention : 10 Years |
| > |
Physical specification : |
| - |
Weight (max.) : 55 g ± 5 g /1.94 oz. |
| - |
Dimension(W x L x H) : 69.80 x 59.90 x 9.50 (mm) |
| > |
Warranty : |
| - |
3 years warranty for SLC standard grade |
| - |
5 years warranty for SLC industrial grade |
| - |
1 years warranty for MLC product |
|
| > |
Conformal coating : Option for special request |
| > |
Functionality : |
| - |
Hardware : Fast Erase or Secure Erase the media data by hardware trigger |
| - |
Software : Fast Erase or Secure Erase the media data by ATA command vender code |
| > |
Sanitization Procedure : |
| - |
Default sanitizing by erase block data to 0xFF on file table for Fast Erase |
| - |
Sanitizing Based on NSA Manual 130-2 for Secure Erase |
| - |
Sanitizing Based on USA Air Force AFSSI 5020 for Secure Erase |
| - |
Sanitizing Based on DoD 5220.22-M for Secure Erase |
| - |
Sanitizing Based on IREC(IRIG)106 for Secure Erase |
| > |
Hardware Jumper Setting for Secure Erase & Fast Erase : |
| |
|
|
|
|
|
| Capacity |
1.8" SATA II SSD - SLC
Standard Grade |
1.8" SATA II SSD - SLC
Industrial Grade |
| 008GB |
SR8SF008G-JACSC-UFE(USE) |
WR8SF008G-JAISI-UFE(USE) |
| 016GB |
SR8SF016G-JACSC-UFE(USE) |
WR8SF016G-JAISI-UFE(USE) |
| 032GB |
SR8SF032G-JACSC-UFE(USE) |
WR8SF032G-JAISI-UFE(USE) |
| - |
- |
- |
|
| Capacity |
1.8" SATA II SSD - MLC
Standard Grade |
1.8" SATA II SSD - MLC
Industrial Grade |
| 008GB |
SR8SF008G-JACMC-UFE(USE) |
WR8SF008G-JACMC-UFE(USE)/C |
| 016GB |
SR8SF016G-JACMC-UFE(USE) |
WR8SF016G-JACMC-UFE(USE)/C |
| 032GB |
SR8SF032G-JACMC-UFE(USE) |
WR8SF032G-JACMC-UFE(USE)/C |
| 064GB |
SR8SF032G-JACMC-UFE(USE) |
WR8SF032G-JACMC-UFE(USE)/C |
|
|
|
| > |
/C : Industrial grade operating temp. -40º C ~ +85 º C with special conformal coating treatment on PCBA |
| > |
UFE - Hardware and software ATA command code for Fast Erase function |
| > |
USE - Secure Erase Procedure by Project Base |
|
